| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Test of wheel turn angle sensors | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Basic settings - transverse acceleration sensor G200; brake pressure sensor G201; turn angle sensor G202; longitudinal acceleration sensor G251 | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Replacement of brake pads | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Basic settings ESP (G200; G202; G251) | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Replacement of brake pads | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Test of functions - Emergency brake light | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Deactivation of the longitudinal acceleration sensor on the test bed | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Setting of braking pressure sensor (G201) | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 03 - Brake electronics | Bleeding of the system | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 09 - Central electrics | Production mode - deactivation | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 19 - Gateway | Disconnect after impact - unblocking | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 19 - Gateway | Diagnostic filter ICAS1 - status | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 19 - Gateway | Roller test station mode | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 19 - Gateway | Tansport mode OFF - ON | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 19 - Gateway | Battery - replacement: adaptation | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 42 - Door electronics driver’s side | Window in rear: blocking - Test | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 42 - Door electronics driver’s side | Window: blocking - Test | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 42 - Door electronics driver’s side | Door electronics driver’s side - basic settings - standardization | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 44 - Steering booster | Setting of steering wheel turn angle sensor (G85) | |||||||||
| 6.3.2025 | Cupra Born (K1) 2022 -> | 44 - Steering booster | Zeroing of software stop EPS MQB | |||||||||
Diagnostic procedures for a VAG diagnostics.
Last actualization: 08.12.2025 | there are 1715 procedures in the database.
Last actualization: 08.12.2025 | there are 1715 procedures in the database.