|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Test of intake air temperature sensor (G42) |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Test of filling and atmospheric pressure sensor (G31) |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Activation - fuel pump (G6) |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Creation of readiness |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Automatic test procedure |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Deletion of statistics memory - Start-stop |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Zeroing learning values DPF - If replaced: pressure difference sensor (G505) |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Customer limitation of maximum speed |
21.1.2025 |
Yeti (5L) A5 (PQ35) 2010 - 2017 |
01 - Engine |
Start/stop - activation/deactivation |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Basic settings - exhaust gas flap |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Creation of readiness |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Snížení Pressureu v railu |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Evacuation of fuel tank III |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Bleeding of fuel system variant III |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
21.1.2025 |
Formentor (KM) MQBevo (PQ38) 2020 -> |
01 - Engine |
Settings - Charge Pressure Controller - NOsetelný servo motor (V465) |
|