|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Test of fuel temperature sensor (G81) |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Test of engine temperature sensor (G62) |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Activation - fuel pump (G6) |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Test of pedal switches (cruise control) |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Creation of readiness |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Automatic test procedure |
21.1.2025 |
A6 /A7 (F2) C8 (MLB Evo) 2019-> |
01 - Engine |
Start/stop - activation/deactivation |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding (deaeration) - Engine cooling |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation - pressure difference sensor - exhaust recirculation |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
DPF regeneration |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Clogging of diesel particulate filter - oil Ash |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test start/stop |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - idle stabilization |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Temperature sensors test |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: clutch pedal - pedal switch |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 2 |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - exhaust recirculation CUUx |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Basic settings - exhaust gas flap |
|