Date Model Control unit address (e.g. 01) Diagnostic procedure
21.1.2025 ID.3 (E1) 2020 -> 03 - Brake electronics Deactivation of the longitudinal acceleration sensor on the test bed
21.1.2025 Enyaq (NY) MEB (PQE3) 2021 -> 03 - Brake electronics Setting of braking pressure sensor (G201)
21.1.2025 ID.3 (E1) 2020 -> 03 - Brake electronics Setting of braking pressure sensor (G201)
21.1.2025 Enyaq (NY) MEB (PQE3) 2021 -> 03 - Brake electronics Bleeding of the system
21.1.2025 ID.3 (E1) 2020 -> 03 - Brake electronics Bleeding of the system
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Security access: blocking detection
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Basic settings - exhaust gas flap
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Measurement of compression pressure
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Zeroing learning values DPF - If replaced: engine control unit
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Adaptation: soot clogging DPF - If replaced: DPF
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Creation of readiness
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Test of filling and atmospheric pressure sensor
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Snížení Pressureu v railu
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Radiator - žaluzie: adaptation
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Evacuation of fuel tank III
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Bleeding of fuel system variant III
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine DPF regeneration - when vehicle is parked
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Settings - Charge Pressure Controller - NOsetelný servo motor (V465)
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Test: přestatusování vačkového hřídele - sací ventily
21.1.2025 Octavia 4 (NX) 2020 -> 01 - Engine Test: lambda control