| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: oil presure for engine run-in | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - Low-pressure exhaust gas return valve | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - exhaust gas return valve 1 (GX5) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values - Intake air mass sensor | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values DPF - If replaced: engine control unit | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: soot clogging DPF - If replaced: DPF | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement CLHx;CNHx | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test of the condition of the diesel particulate filter - oil ash CLHx;CNHx | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Creation of readiness | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Turbo blower - replacement (adaptation) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement R4 | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Bleeding of fuel system - variant 2 | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test of the condition of the diesel particulate filter | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test - filling pressure control valve (N75) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test: temperature sensor - ambient temperature (G17) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test: posilovač brzd - pressure sensor (G294) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test: brake pedal - pedál pedal switch (F) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test of intake air temperature sensor (G299) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test of gas pedal position sensor 1; 2 (G79; G185) | |||||||||
| 21.1.2025 | Crafter (SY) 2016 -> | 01 - Engine | Test of load signals for alternator | |||||||||
Diagnostic procedures for a VAG diagnostics.
Last actualization: 23.08.2025 | there are 1715 procedures in the database.
Last actualization: 23.08.2025 | there are 1715 procedures in the database.