|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
23.6.2025 |
Passat B8 (MQB/PQ48) |
BB - LR doors |
Door electronics - basic settings standardization |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Injector: corrective value - Test V3 |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Adaptation of injection valve after replacement R3 |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Adaptation - pressure difference sensor - exhaust recirculation |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
DPF regeneration |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Clogging of diesel particulate filter - oil Ash |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - idle stabilization |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Temperature sensors test |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Basic settings - exhaust gas flap |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Zeroing learning values - Low-pressure exhaust gas return valve |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Zeroing learning values - cylinders: pressure sensor |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Measurement of compression pressure |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Basic settings - Zero detection of SRC additive level |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Zeroing learning values: additive injection system |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - exhaust recirculation (GX6) - servo motor (V339) CLHx |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - coolant temperature - temperature sensor (G62) |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - ambient temperature sensor - temperature sensor (G17) |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - intercooler - temperature sensor (G811) |
21.6.2025 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - temperature chladici kapaliny - snimac teploty (G62) |
|