|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
11.10.2022 |
Transporter (7H) (T6 PQ75) 2015 -> |
01 - Engine |
Emptying of the system AdBlue SCR |
11.10.2022 |
Transporter (7H) (T6 PQ75) 2015 -> |
01 - Engine |
Reset - Starter restriction from SRC system |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Basic settings - exhaust gas flap |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test of cruise control |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Creation of readiness |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Snížení Pressureu v railu |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Evacuation of fuel tank III |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Bleeding of fuel system variant III |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Adaptation of injection valve after replacement |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Settings - Charge Pressure Controller - NOsetelný servo motor (V465) |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: detection of burning failure |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: přestatusování vačkového hřídele - sací ventily |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: lambda control |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: aeration of fuel tank |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: temperature sensor - ambient temperature (G17) |
11.10.2022 |
Caddy MQB (PQ35) 2016 -> |
01 - Engine |
Test: fuel pressure regulation vlave (N276) |
|