Date Model Control unit address (e.g. 01) Diagnostic procedure
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Adaptation - pressure difference sensor - exhaust recirculation
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine DPF regeneration
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Clogging of diesel particulate filter - oil Ash
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - idle stabilization
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Temperature sensors test
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - filling pressure control valve (N75) CUUx variant 1
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Basic settings - exhaust gas flap
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values - Low-pressure exhaust gas return valve
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values - cylinders: pressure sensor
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Measurement of compression pressure
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Basic settings - Zero detection of SRC additive level
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values: additive injection system
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - exhaust recirculation (GX6) - servo motor (V339) CLHx
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - coolant temperature - temperature sensor (G62)
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - ambient temperature sensor - temperature sensor (G17)
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - intercooler - temperature sensor (G811)
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - temperature chladici kapaliny - snimac teploty (G62)
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test of DPF differential pressure sensor 1 (G505) CUUx
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test of exhaust gases temperature sensor 2;3;4 (G448; G495;G648) CUUx
21.6.2025 Tarraco (KN) 2019 -> 01 - Engine Test - Intake air mass sensor - test drive