Date Model Control unit address (e.g. 01) Diagnostic procedure
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test - ambient temperature sensor - temperature sensor (G17)
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test - intercooler - temperature sensor (G811)
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test - temperature chladici kapaliny - snimac teploty (G62)
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test - filling pressure control valve (N75) CLHx
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test of DPF differential pressure sensor 1 (G505) CUUx
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test of exhaust gases temperature sensor 2;3;4 (G448; G495;G648) CUUx
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test of fuel temperature sensor (G81)
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test - Intake air mass sensor - test drive
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test of cruise control
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Adaptation: oil presure for engine run-in
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Basic settings - Low-pressure exhaust gas return valve
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Basic settings - exhaust gas return valve 1 (GX5)
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values - Intake air mass sensor
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values DPF - If replaced: engine control unit
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Adaptation: soot clogging DPF - If replaced: DPF
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Adaptation of injection valve after replacement CLHx;CNHx
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Test of the condition of the diesel particulate filter - oil ash CLHx;CNHx
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Bleeding (deaeration) - Engine cooling
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Creation of readiness
25.6.2026 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values - Quantity measuring unit - regulator valve
 
« Previous 1 26 27 28 29 30 31 32 24395 48789 73182 97576 Next »