|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor (G31) |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Activation - fuel pump (G6) |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Test of gas pedal position sensor 1;2 (G79); (G185) |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Test - clutch pedal: Position sensor (G476) |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Test of pedal switches (cruise control) |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Creation of readiness |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Automatic test procedure |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Deletion of statistics memory - Start-stop |
9.10.2022 |
Superb 3 (NP) (MLB/PQ48) 2015 -> |
01 - Engine |
Start/stop - activation/deactivation |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Basic settings - exhaust gas flap |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Creation of readiness |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Snížení Pressureu v railu |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Evacuation of fuel tank III |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Bleeding of fuel system variant III |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
9.10.2022 |
Arteon (3H) (MQB/PQ48) 2017 -> |
01 - Engine |
Settings - Charge Pressure Controller - NOsetelný servo motor (V465) |
|