|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Transporter (7H) (T6 PQ75) 2015 -> |
01 - Engine |
Emptying of the system AdBlue SCR |
9.10.2022 |
Transporter (7H) (T6 PQ75) 2015 -> |
01 - Engine |
Reset - Starter restriction from SRC system |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Test - Intake air mass sensor CUUx |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Basic settings - exhaust gas flap |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Test - Intake air mass sensor - test drive |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Adaptation of DPF differential pressure sensor |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Adaptation of injection valve after replacement CLHx;CNHx |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Test of the condition of the diesel particulate filter - oil ash CLHx;CNHx |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Creation of readiness |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Zeroing learning values - Quantity measuring unit - regulator valve |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Zeroing learning values - Adaptation of the mean quantity value |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Turbo blower - replacement (adaptation) |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
DPF regeneration CAYB |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
DPF regeneration |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Adaptation of injection valve after replacement |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Adaptation of DPF differential pressure sensor |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Bleeding of fuel system - variant 2 |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Reset of DPF clogging |
9.10.2022 |
Polo (6R) 2010 - 2014 |
01 - Engine |
Adaptation of the deviation of the minimum number of injectors |
|