| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 21.1.2025 | Caddy MQB (PQ35) 2016 -> | 01 - Engine | Reset - Starter restriction from SRC system | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Security access: blocking detection | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | DPF regeneration | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Clogging of diesel particulate filter - oil Ash | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Injector: corrective value - Test V6 | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Injector: corrective value - Test V5 | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Test - idle stabilization | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Test - filling pressure control valve (N75) CUUx variant 1 | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Basic settings - exhaust gas flap | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Zeroing learning values - cylinders: pressure sensor | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Measurement of compression pressure | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Test of exhaust gases temperature sensor 2;3;4 (G448; G495;G648) CUUx | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Test of cruise control | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Adaptation: oil presure for engine run-in | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Adaptation of injection valve after replacement CLHx;CNHx | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Test of the condition of the diesel particulate filter - oil ash CLHx;CNHx | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Creation of readiness | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Zeroing learning values - Quantity measuring unit - regulator valve | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Turbo blower - replacement (adaptation) | |||||||||
| 21.1.2025 | Q8 (F1) MLBevo (PL58) 2019 -> | 01 - Engine | Adaptation of injection valve after replacement R4 | |||||||||