| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test - intercooler - temperature sensor (G811) | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test - temperature chladici kapaliny - snimac teploty (G62) | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test - filling pressure control valve (N75) CLHx | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test of DPF differential pressure sensor 1 (G505) CUUx | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test of exhaust gases temperature sensor 2;3;4 (G448; G495;G648) CUUx | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test of fuel temperature sensor (G81) | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test - Intake air mass sensor - test drive | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test of cruise control | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: oil presure for engine run-in | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - Low-pressure exhaust gas return valve | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - exhaust gas return valve 1 (GX5) | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values - Intake air mass sensor | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values DPF - If replaced: engine control unit | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: soot clogging DPF - If replaced: DPF | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement CLHx;CNHx | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Test of the condition of the diesel particulate filter - oil ash CLHx;CNHx | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Creation of readiness | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Turbo blower - replacement (adaptation) | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement R4 | |||||||||
| 22.2.2026 | Crafter (SY) 2016 -> | 01 - Engine | Bleeding of fuel system - variant 2 | |||||||||
Diagnostic procedures for a VAG diagnostics.
Last actualization: 02.03.2026 | there are 1715 procedures in the database.
Last actualization: 02.03.2026 | there are 1715 procedures in the database.