|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Basic settings - Neutral gear sensor (G701) |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Basic settings - Neutral gear sensor (G701) |
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Creation of readiness |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Creation of readiness |
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Automatic test procedure |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Automatic test procedure |
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Zeroing learning values - Lambda sensor(s) |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Zeroing learning values - Lambda sensor(s) |
21.1.2025 |
T-Cross (C1) (PQ27) 2019-> |
01 - Engine |
Start/stop - activation/deactivation |
21.1.2025 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Start/stop - activation/deactivation |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding (deaeration) - Engine cooling |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation - pressure difference sensor - exhaust recirculation |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
DPF regeneration |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Clogging of diesel particulate filter - oil Ash |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test start/stop |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - idle stabilization |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Temperature sensors test |
21.1.2025 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: clutch pedal - pedal switch |
|