|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
08 - Air-conditioning |
Air-conditioning - control unit - replacement |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
08 - Air-conditioning |
Storage of seat heating upon switching off the ignition - front passenger |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
08 - Air-conditioning |
Condition for disconnection of the compressor |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
08 - Air-conditioning |
Storage of seat heating upon switching off the ignition - driver |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
08 - Air-conditioning |
Basic settings - learned terminal buffers of the valves |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
03 - Brake electronics |
Test of wheel turn angle sensors |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
03 - Brake electronics |
Replacement of brake pads |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
03 - Brake electronics |
Bleeding of the system |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
03 - Brake electronics |
Deactivation of the longitudinal acceleration sensor on the test bed |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
DPF regeneration |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Clogging of diesel particulate filter - oil Ash |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test - idle stabilization |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Temperature sensors test |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test: clutch pedal - pedal switch |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test - additive pump SCR AD-Blue (V437) |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 2 |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Test - exhaust recirculation CUUx |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Basic settings - exhaust gas flap |
1.2.2024 |
A3 (GY) MQBevo (PQ38) 2021 -> |
01 - Engine |
Zeroing learning values - Low-pressure exhaust gas return valve |
|