|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Automatic test procedure |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Deletion of statistics memory - Start-stop |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Zeroing learning values - Adaptation of the mean quantity value |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Zeroing learning values - Lambda sensor(s) |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit/DPF |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Zeroing learning values DPF - If replaced: pressure difference sensor (G505) |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Zeroing learning values DPF - If replaced: DPF |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Injector: corrective value - Test |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Adaptation of injection valve after replacement |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Customer limitation of maximum speed |
1.2.2024 |
A4 (8K) B8 (MLB/PQ48) 2008 - 2016 |
01 - Engine |
Start/stop - activation/deactivation |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
D7 - Light Ctrl Right |
Adjustment of the headlights - LED |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
D6 - Light Ctrl Left |
Adjustment of the headlights - LED |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
75 - Telematik |
Aerial - Test |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
75 - Telematik |
Microphone - Test |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
75 - Telematik |
Error memory - information |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
75 - Telematik |
Activation |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
6D - Gull-wing door |
Rear lid/tailgate/boot lid - opening angle - settings |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
5F - Electro Info |
Clear DTC 1555 - Software version Managenent |
1.2.2024 |
Q3 (F3) (MQB) 2019 -> |
4B - Multifunction Module |
Tourist mode - settings |
|