|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Zeroing learning values DPF - If replaced: pressure difference sensor (G505) |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Zeroing learning values DPF - If replaced: DPF |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Injector: corrective value - Test |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Adaptation of injection valve after replacement |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Customer limitation of maximum speed |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Start/stop - activation/deactivation |
6.10.2022 |
Crafter (2E) 2006 - 2016 |
01 - Engine |
Test of the condition of the diesel particulate filter - oil ash |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Basic settings - exhaust gas flap |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Test of cruise control |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Creation of readiness |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Snížení Pressureu v railu |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Radiator - žaluzie: adaptation |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Camshaft - Position sensor: adaptation |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Evacuation of fuel tank III |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Bleeding of fuel system variant III |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
6.10.2022 |
Fabia 3 (NJ) A04 (PQ26) 2015 -> |
01 - Engine |
Adaptation of injection valve after replacement |
|