| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of radiator fan control unit (J293) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of heating (glow) unit (J179) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of engine temperature sensor (G62) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of intake air temperature sensor (G42) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test - exhaust gas return valve 1 (GX5) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test - Change-over valve for the cooler of the exhaust gas recirculation | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test - exhaust recirculation - servo motor (V338) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Activation - fuel pump (G6) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Evacuation of fuel tank | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test / activation of fuel pump and control relay | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Bleeding of fuel system | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test - clutch pedal: Position sensor (G476) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of pedal switches (cruise control) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - adaptation - Test: throttle valve | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - turbo blower | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Basic settings - exhaust gas return valve 1 (GX5) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Creation of readiness | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Automatic test procedure | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values - Lambda sensor(s) | |||||||||
| 5.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Injector: corrective value - Test | |||||||||
Diagnostic procedures for a VAG diagnostics.
Last actualization: 22.06.2025 | there are 1715 procedures in the database.
Last actualization: 22.06.2025 | there are 1715 procedures in the database.