|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
5.10.2022 |
Altea / Toledo (5P) A5 (PQ35) 2004 - 2015 |
01 - Engine |
Customer limitation of maximum speed |
5.10.2022 |
Altea / Toledo (5P) A5 (PQ35) 2004 - 2015 |
01 - Engine |
Test of the condition of the diesel particulate filter - oil ash |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Basic settings - exhaust gas flap |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test - Intake air mass sensor - test drive |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test of cruise control |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Adaptation: oil presure for engine run-in |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Creation of readiness |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Snížení Pressureu v railu |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Evacuation of fuel tank III |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Bleeding of fuel system variant III |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: detection of burning failure |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: přestatusování vačkového hřídele - sací ventily |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: lambda control |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: aeration of fuel tank |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: temperature sensor - ambient temperature (G17) |
5.10.2022 |
Tarraco (KN) 2019 -> |
01 - Engine |
Test: fuel pressure regulation vlave (N276) |
|