|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
31.1.2024 |
MAN TGE (UZ) 2018 -> |
03 - Brake electronics |
Bleeding of the system |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
03 - Brake electronics |
Deactivation of the longitudinal acceleration sensor on the test bed |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
DPF regeneration |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Clogging of diesel particulate filter - oil Ash |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Temperature sensors test |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - additive pump SCR AD-Blue (V437) |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 2 |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - Intake air mass sensor CUUx |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - exhaust recirculation CUUx |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Basic settings - exhaust gas flap |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Zeroing learning values - cylinders: pressure sensor |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Basic settings - Zero detection of SRC additive level |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Zeroing learning values: additive injection system |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - Dosing of the reducing agent SCR AdBlue |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Check the leakproofness of the lines AdBlue - SCR |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - Fuel metering valve (N290) CUUx |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - fuel pressure regulation vlave (N276) CUUx |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - coolant temperature - temperature sensor (G62) |
31.1.2024 |
MAN TGE (UZ) 2018 -> |
01 - Engine |
Test - ambient temperature sensor - temperature sensor (G17) |
|