Date Model Control unit address (e.g. 01) Diagnostic procedure
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Basic settings ESP (G200; G202; G251)
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Basic settings - Clutch engagement point
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Replacement of brake pads
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Trailer stabilization assistant - adaptation
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Test of functions - Emergency brake light
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Deactivation of the longitudinal acceleration sensor on the test bed
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Setting of braking pressure sensor (G201)
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Bleeding of the system
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Security access
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Tyre-pressure monitoring - basic settings
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Deactivation of the longitudinal acceleration sensor on the test bed
30.1.2024 Tarraco (KN) 2019 -> 03 - Brake electronics Coding
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Test: clutch pedal - pedal switch
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Basic settings - exhaust gas flap
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Test of cruise control
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Adaptation: oil presure for engine run-in
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Zeroing learning values DPF - If replaced: engine control unit
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Adaptation: soot clogging DPF - If replaced: DPF
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Creation of readiness
30.1.2024 Tarraco (KN) 2019 -> 01 - Engine Test of filling and atmospheric pressure sensor