|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Erasing of learning values |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test of gas pedal position sensor 1; 2 (G79; G185) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test / activation of fuel pump and control relay |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test - engine control unit (J623) - power supply |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test - throttle actuator |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test - injector 1-4 (N30;N31;N32;N33) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test - voltage: terminal 30 (J317) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test of engine temperature sensor (G62) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test of intake air temperature sensor (G42) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test of filling and atmospheric pressure sensor (G31) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Basic settings - Neutral gear sensor (G701) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Creation of readiness |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Automatic test procedure |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Start/stop - activation/deactivation |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Basic settings - exhaust gas flap |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Test of cruise control |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Creation of readiness |
|