|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Test of filling and atmospheric pressure sensor (G31) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Basic settings - adaptation - Test: throttle valve |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Basic settings - Neutral gear sensor (G701) |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Creation of readiness |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Automatic test procedure |
2.10.2022 |
Polo (AW) 2015 - 2020 |
01 - Engine |
Start/stop - activation/deactivation |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Basic settings - exhaust gas flap |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Test of cruise control |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Creation of readiness |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Snížení Pressureu v railu |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Radiator - žaluzie: adaptation |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Camshaft - Position sensor: adaptation |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Evacuation of fuel tank III |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Bleeding of fuel system variant III |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
DPF regeneration - when vehicle is parked |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Adaptation of injection valve after replacement |
2.10.2022 |
Scala / Kamiq (NW) MQB A0/PQ27 2019 -> |
01 - Engine |
Settings - Charge Pressure Controller - NOsetelný servo motor (V465) |
|