|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation of injection valve after replacement CLHx;CNHx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding (deaeration) - Engine cooling |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Creation of readiness |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values - Quantity measuring unit - regulator valve |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Turbo blower - replacement (adaptation) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation of injection valve after replacement |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding of fuel system - variant 2 |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of filling and atmospheric pressure sensor |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: temperature sensor - ambient temperature (G17) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: Starter control - relay 2 (J907) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: Starter control - relay 1 (J906) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: brake pedal - pedál pedal switch (F) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of cruise control |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of intake air temperature sensor (G299) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of gas pedal position sensor 1; 2 (G79; G185) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Automatic test procedure |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Creation of readiness |
|