|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Customer limitation of maximum speed |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Start/stop - activation/deactivation |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test: Reducing agent SCR - Efficiency |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Emptying of the system AdBlue SCR |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Reset - Starter restriction from SRC system |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - additive pump SCR AD-Blue (V437) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 2 |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) CUUx variant 1 |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Intake air mass sensor CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - exhaust recirculation CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Basic settings - exhaust gas flap |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values - cylinders: pressure sensor |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Basic settings - Zero detection of SRC additive level |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values: additive injection system |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Dosing of the reducing agent SCR AdBlue |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Check the leakproofness of the lines AdBlue - SCR |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Fuel metering valve (N290) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - fuel pressure regulation vlave (N276) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - coolant temperature - temperature sensor (G62) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - ambient temperature sensor - temperature sensor (G17) |
|