| Date | Model | Control unit address (e.g. 01) | Diagnostic procedure | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: oil presure for engine run-in | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values - Intake air mass sensor | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values DPF - If replaced: engine control unit | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation: soot clogging DPF - If replaced: DPF | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement CLHx;CNHx | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Bleeding (deaeration) - Engine cooling | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Creation of readiness | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Zeroing learning values - Quantity measuring unit - regulator valve | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Turbo blower - replacement (adaptation) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Adaptation of injection valve after replacement | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Bleeding of fuel system - variant 2 | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of filling and atmospheric pressure sensor | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test - filling pressure control valve (N75) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test: temperature sensor - ambient temperature (G17) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test: Starter control - relay 2 (J907) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test: Starter control - relay 1 (J906) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test: brake pedal - pedál pedal switch (F) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of cruise control | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of intake air temperature sensor (G299) | |||||||||
| 9.10.2022 | Crafter (SY) 2016 -> | 01 - Engine | Test of gas pedal position sensor 1; 2 (G79; G185) | |||||||||
Diagnostic procedures for a VAG diagnostics.
Last actualization: 17.12.2024 | there are 1715 procedures in the database.
Last actualization: 17.12.2024 | there are 1715 procedures in the database.