|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Automatic test procedure |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Creation of readiness |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Evacuation of fuel tank II |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Evacuation of fuel tank |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding of fuel system variant II |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding of fuel system |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Customer limitation of maximum speed |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Creation of readiness |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Evacuation of fuel tank |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Bleeding of fuel system |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test start/stop |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of gas pedal position sensor 1; 2 (G79; G185) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test / activation of fuel pump and control relay |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - engine control unit (J623) - power supply |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Charge Pressure Controller - Position sensor (G581) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) - variant 2 |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - injector 1-4 (N30;N31;N32;N33) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - fuel pump: control unit (J538) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - throttle valve: control unit (J338) |
|