|
Date
|
Model
|
Control unit address (e.g. 01)
|
Diagnostic procedure
|
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Basic settings - Zero detection of SRC additive level |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values: additive injection system |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Dosing of the reducing agent SCR AdBlue |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Check the leakproofness of the lines AdBlue - SCR |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Fuel metering valve (N290) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - fuel pressure regulation vlave (N276) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - coolant temperature - temperature sensor (G62) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - ambient temperature sensor - temperature sensor (G17) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - intercooler - temperature sensor (G811) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - temperature chladici kapaliny - snimac teploty (G62) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - filling pressure control valve (N75) CLHx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of DPF differential pressure sensor 1 (G505) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of exhaust gases temperature sensor 2;3;4 (G448; G495;G648) CUUx |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test of fuel temperature sensor (G81) |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Test - Intake air mass sensor - test drive |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation: oil presure for engine run-in |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values - Intake air mass sensor |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Zeroing learning values DPF - If replaced: engine control unit |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation: soot clogging DPF - If replaced: DPF |
9.10.2022 |
Crafter (SY) 2016 -> |
01 - Engine |
Adaptation of injection valve after replacement CLHx;CNHx |
|